What is Six Sigma?
Six Sigma is a set of management tools and techniques designed to improve the capability of the business process by reducing the likelihood of error. Six Sigma is a data-driven approach that uses a statistical methodology for eliminating defects, defect reduction, and profit improvement.
Digital transformation has become the hottest buzzword of this decade. New technologies and tools are supporting the transformation journey of companies big and small as they compete to get a bigger slice of business in a fast-paced competitive environment. Yet, is it enough to smooth a company’s transformative process? Can a standalone technology implementation remove a bottleneck in the production process or support troubleshooting a service design flaw? Although digital transformation fast-tracks a company’s growth, it has to be equally supported by management methods of quality control and business transformation.
Keeping in tune with emerging markets and processes, the American company Motorola developed a new concept of quality management process in 1986. Over the years, it has been refined and polished into a sound theory of principles and methods, aimed at business transformation through a clearly defined process. This finished product is Six Sigma. And in this article, we will cover the following topics in detail:
- What is six sigma?
- The 5 key principles of six sigma
- The six sigma methodology
- The six sigma process of business transformation
- Top six sigma techniques
- Top 7 six sigma tools
- Six sigma levels
- Six Sigma certification levels
- Various career opportunities and salary aspects
- Top six sigma learning resources
The etymology is based on the Greek symbol “sigma” or “σ,” a statistical term for measuring process deviation from the process mean or target. “Six Sigma” comes from the bell curve used in statistics, where one Sigma symbolizes a single standard deviation from the mean. If the process has six Sigmas, three above and three below the mean, the defect rate is classified as “extremely low.”
The graph of the normal distribution below underscores the statistical assumptions of the Six Sigma model. The higher the standard deviation, the higher the spread of values encountered. So, processes, where the mean is a minimum of 6σ away from the closest specification limit, are aimed at Six Sigma.
The 5 Key Principles of Six Sigma
The concept of Six Sigma has a simple goal – delivering near-perfect goods and services for business transformation for optimal customer satisfaction (CX).
Goals are achieved through a two-pronged approach:
Six Sigma has its foundations in five key principles:
Focus on the CustomerThis is based on the popular belief that the “customer is the king.” The primary goal is to bring maximum benefit to the customer. For this, a business needs to understand its customers, their needs, and what drives sales or loyalty. This requires establishing the standard of quality as defined by what the customer or market demands.
Measure the Value Stream and Find Your ProblemMap the steps in a given process to determine areas of waste. Gather data to discover the specific problem area that is to be addressed or transformed. Have clearly defined goals for data collection, including defining the data to be collected, the reason for the data gathering, insights expected, ensuring the accuracy of measurements, and establishing a standardized data collection system. Ascertain if the data is helping to achieve the goals, whether or not the data needs to be refined, or additional information collected. Identify the problem. Ask questions and find the root cause.
Get Rid of the JunkOnce the problem is identified, make changes to the process to eliminate variation, thus removing defects. Remove the activities in the process that do not add to the customer value. If the value stream doesn’t reveal where the problem lies, tools are used to help discover the outliers and problem areas. Streamline functions to achieve quality control and efficiency. In the end, by taking out the above-mentioned junk, bottlenecks in the process are removed.
Keep the Ball RollingInvolve all stakeholders. Adopt a structured process where your team contributes and collaborates with their varied expertise for problem-solving.
Six Sigma processes can have a great impact on an organization, so the team has to be proficient in the principles and methodologies used. Hence, specialized training and knowledge are required to reduce the risk of project or re-design failures and ensure that the process performs optimally.
Ensure a Flexible and Responsive EcosystemThe essence of Six Sigma is business transformation and change. When a faulty or inefficient process is removed, it calls for a change in the work practice and employee approach. A robust culture of flexibility and responsiveness to changes in procedures can ensure streamlined project implementation. The people and departments involved should be able to adapt to change with ease, so to facilitate this, processes should be designed for quick and seamless adoption. Ultimately, the company that has an eye fixed on the data examines the bottom line periodically and adjusts its processes where necessary, can gain a competitive edge.
The Six Sigma Methodology
The two main Six Sigma methodologies are DMAIC and DMADV. Each has its own set of recommended procedures to be implemented for business transformation.
DMAIC is a data-driven method used to improve existing products or services for better customer satisfaction. It is the acronym for the five phases: D – Define, M – Measure, A – Analyse, I – Improve, and C – Control. DMAIC is applied in the manufacturing of a product or delivery of a service.
DMADV is a part of the Design for Six Sigma (DFSS) process used to design or re-design different processes of product manufacturing or service delivery. The five phases of DMADV are D – Define, M – Measure, A – Analyse, D – Design, and V – Validate. DMADV is employed when existing processes do not meet customer conditions, even after optimization, or when it is required to develop new methods. It is executed by Six Sigma Green Belts and Six Sigma Black Belts and under the supervision of Six Sigma Master Black Belts. We’ll get to the belts later.
The two methodologies are used in different business settings, and professionals seeking to master these methods and application scenarios would do well to take an online certificate program taught by industry experts.
The Six Sigma Process of Business Transformation
Although what is Six Sigma uses various methods to discover deviations and solve problems, the DMAIC is the standard methodology used by Six Sigma practitioners. Six Sigma uses a data-driven management process used for optimizing and improving business processes. The underlying framework is a strong customer focus and robust use of data and statistics to conclude.
The Six Sigma Process of the DMAIC method has five phases
Each of the above phases of business transformation has several steps:
DEFINE The Six Sigma process begins with a customer-centric approach.
- Step 1: The business problem is defined from the customer’s perspective.
- Step 2: Goals are set. What do you want to achieve? What are the resources you will use to achieve the goals?
- Step 3: Map the process. Verify with the stakeholders that you are on the right track.
MEASURE The second phase is focused on the metrics of the project and the tools used in the measurement. How can you improve? How can you quantify this?
- Step 1: Measure your problem in numbers or with supporting data.
- Step 2: Define performance yardstick. Fix the limits for “Y.”
- Step 3: Evaluate the measurement system to be used. Can it help you achieve your outcome?
ANALYZE The third phase analyzes the process to discover the influencing variables.
- Step 1: Determine if your process is efficient and effective. Does the process help achieve what you need?
- Step 2: Quantify your goals in numbers. For instance, reduce defective goods by 20%.
- Step 3: Identify variations using historical data.
IMPROVE This process investigates how the changes in “X” impact “Y.” This phase is where you identify how you can improve the process implementation.
- Step 1: Identify possible reasons. Test to identify which of the “X” variables identified in Process III influence “Y.”
- Step 2: Discover relationships between the variables.
- Step 3: Establish process tolerance, defined as the precise values that certain variables can have, and still fall within acceptable boundaries, for instance, the quality of any given product. Which boundaries need X to hold Y within specifications? What operating conditions can impact the outcome? Process tolerances can be achieved by using tools like robust optimization and validation set.
CONTROL In this final phase, you determine that the performance objective identified in the previous phase is well implemented and that the designed improvements are sustainable.
- Step 1: Validate the measurement system to be used.
- Step 2: Establish process capability. Is the goal being met? For instance, will the goal of reducing defective goods by 20 percent be achieved?
- Step 3: Once the previous step is satisfied, implement the process.
Interested in learning Lean Six Sigma and its importance? Check out the Lean Six Sigma Green Belt Certification course preview!
Six Sigma Techniques
The Six Sigma methodology also uses a mix of statistical and data analysis tools such as process mapping and design and proven qualitative and quantitative techniques, to achieve the desired outcome.
Brainstorming
Brainstorming is the key process of any problem-solving method and is often utilized in the “improve” phase of the DMAIC methodology. It is a necessary process before anyone starts using any tools. Brainstorming involves bouncing ideas and generating creative ways to approach a problem through intensive freewheeling group discussions. A facilitator, who is typically the lead Black Belt or Green Belt, moderates the open session among a group of participants.
Root Cause Analysis/The 5 Whys
This technique helps to get to the root cause of the problems under consideration and is used in the “analyze” phase of the DMAIC cycle.
In the 5 Whys technique, the question “why” is asked, again and again, finally leading up to the core issue. Although “five” is a rule of thumb, the actual number of questions can be greater or fewer, whatever it takes to gain clarity.
Voice of the Customer
This is the process used to capture the “voice of the customer” or customer feedback by either internal or external means. The technique is aimed at giving the customer the best products and services. It captures the changing needs of the customer through direct and indirect methods. The voice of the customer technique is used in the “define’ phase of the DMAIC method, usually to further define the problem to be addressed.
The 5S System
This technique has its roots in the Japanese principle of workplace energies. The 5S System is aimed at removing waste and eliminating bottlenecks from inefficient tools, equipment, or resources in the workplace. The five steps used are Seiri (Sort), Seiton (Set In Order), Seiso (Shine), Seiketsu (Standardize), and Shitsuke (Sustain).
Kaizen (Continuous Improvement)
The Kaizen technique is a powerful strategy that powers a continuous engine for business improvement. It is the practice of continuously monitoring, identifying and executing improvements. This is a particularly useful practice for the manufacturing sector. Collective and ongoing improvements ensure a reduction in waste, as well as immediate change whenever the smallest inefficiency is observed.
Benchmarking
Benchmarking is the technique that employs a set standard of measurement. It involves making comparisons with other businesses to gain an independent appraisal of the given situation. Benchmarking may involve comparing important processes or departments within a business (internal benchmarking), comparing similar work areas or functions with industry leaders (functional benchmarking), or comparing similar products and services with that of competitors (competitive benchmarking).
Poka-yoke (Mistake Proofing)
This technique’s name comes from the Japanese phrase meaning “to avoid errors,” and entails preventing the chance of mistakes from occurring. In the poka-yoke technique, employees spot and remove inefficiencies and human errors during the manufacturing process.
Value Stream Mapping
The value stream mapping technique charts the current flow of materials and information to design a future project. The objective is to remove waste and inefficiencies in the value stream and create leaner operations. It identifies seven different types of waste and three types of waste removal operations.
The Six Sigma Tools
- Cause and Effect Analysis
- Flow Chart
- Pareto Chart
- Histogram
- Check Sheet
- Scatter Plot
- Control Chart
Six Sigma Levels
The Six Sigma training levels conform to specified training requirements, education criteria, job standards, and eligibility.
White Belt
This is the simplest stage, where:
- Any newcomer can join.
- People work with teams on problem-solving projects.
- The participant is required to understand the basic Six Sigma concepts.
Yellow Belt
Here, the participant:
- Takes part as a project team member.
- Reviews process improvements.
- Gains understanding of the various methodologies, and DMAIC.
Green Level
This level of expertise requires the following criteria:
- Minimum of three years of full-time employment.
- Understand the tools and methodologies used for problem-solving.
- Hands-on experience on projects involving some level of business transformation.
- Guidance for Black Belt projects in data collection and analysis.
- Lead Green Belt projects or teams.
Black Level
This level includes the following:
- Minimum of three years of full-time employment
- Work experience in a core knowledge area
- Proof of completion of a minimum of two Six Sigma projects
- Demonstration of expertise in applying multivariate metrics to diverse business change settings
- Leading diverse teams in problem-solving projects.
- Training and coaching project teams.
Master Black Belt
To reach this level, a candidate must:
- Be in possession of a Black Belt certification
- Have a minimum of five years of full-time employment or Proof of completion of a minimum of 10 Six Sigma projects
- A proven work portfolio, with individual specific requirements, as given here, for instance.
- Have coached and trained Green Belts and Black Belts.
- Develop key metrics and strategies.
- Have worked as an organization’s Six Sigma technologist and internal business transformation advisor.
The Six Sigma Certification Levels
Six Sigma certification is much like the certification system followed in martial arts, where a wannabe Six Sigma professional begins with the White Belt and upskills his way up to become the master of the pack with the Master Black Belt; or take an integrated certification offered by some institutes.
What are the Six Sigma Career Choices and Salary Prospects?
Six Sigma is a great way to climb up the career ladder with cool job titles and match salary prospects. Companies that routinely hire candidates to fill Sigma Six positions include 3M, Abbott Laboratories, General Electric, The Hershey Company, IBM, Honeywell, Newell Rubbermaid, Siemens, and Wells Fargo.
There are several career choices for Six Sigma professionals as manufacturing engineers, compliance engineers, and operating system specialists.
Additionally, there are career opportunities with the following titles, although the precise nomenclature can vary from company to company:
- Six Sigma Analyst
- Six Sigma Black Belt
- Six Sigma Consultant
- Director of Operational Excellence
- Functional Project Lead
- Senior Project Manager
- Six Sigma Projects Manager
- Business Process Manager
- Lead Analyst/Project Manager
In terms of salary, according to Glassdoor, a Six Sigma Green Belt certified can expect an average yearly salary of $68,840 per year.
Six Sigma Learning Resources
So whether you are a graduate in any stream, an engineer, or an MBA professional, if you want to enhance your career prospects and salary gains, then make sure to get certified in Six Sigma courses. Begin with a Green Belt and climb your way up to a Master Black Belt to command your salary. As a fresher, you can start learning Six Sigma principles by enrolling in Simplilearn’s Lean Six Sigma Green Belt certificate program, and then avail the higher certificate levels as you gain work and project experience
